SC Johnson® One Step/Paste Wax Wood Floor Wax

SC Johnson Floor Care: Clean Floors. Done Right.

Right@Home™ Home-care tips, offers, recipes & more Check it Out >>

SC Johnson® One Step offers fine floor care that leaves wood floors with a rich, luxurious satin finish.

	1.	SWEEP or vacuum up loose dirt.

	2.	SHAKE well before using.

	3.	POUR small pool of product onto floor.

	4.	SPREAD evenly with a clean cloth or wax applier. (Do not use a sponge or sponge mop.) Keep cloth or applicator well saturated. Use just enough rubbing action to loosen dirt.

	5.	FINISH with smooth, even strokes in one direction. Use the product liberally so that the floor appears uniformly wet.

	6.	LET DRY. The floor will dry to a deep, rich shine in 20-30 minutes. There is no need for buffing.

	7.	WASH APPLICATOR in a pail of detergent solution.

FIRST WAXING ONLY
SC Johnson® One Step wax and buffing waxes don't go together. Test a small area in a corner. Apply SC Johnson® One Step wax as directed. If it dries dull, then the floor has a layer of old wax which must be removed as follows:

	a.	Wash a small area with a liberal amount of SC Johnson® One Step Wax using a clean, dry, cloth.

	b.	Wipe dry immediately with a clean, dry cloth. Change cloths often to insure complete pick up of the old wax.

	c.	After the old wax is removed from the entire floor, apply SC Johnson® One Step Wax as directed above.

•	Check manufacturing instructions before waxing newly laid or recently sealed wood floors.

•	If your floor is worn or porous, additional applications of SC Johnson® One Step Wax may be necessary.

•	Never use detergents or water on wood floors.

•	Do not use on asphalt tiles.

SC Johnson® Paste Wax provides lasting beauty and protection for all wood surfaces, metal, leather, plastic, cork, and vinyl.

	1.	Clean surface of heavy dirt and sticky spots. Use a solvent based cleaner for floors; use mild soap and water for furniture.

	2.	Apply a thin, even coat of wax, working with the grain.

	3.	Allow to dry to a haze, then buff with soft cloth. For floors, wait 20-30 minutes before buffing with electric polisher.